5050 Specifications: A brief description: ■ 5.0x5.0mm Top SMD ■ Colloid Color: Yellow ■ Colloid Color: White Ratings (Ta = 25 ° C room temperature conditions) Item Symbol Rating Unit Forward Current IF 60 mA Peak Forward Current (1) IFP 90 mA Reverse Voltage VR 5 V peak power PD 110 mW Operating temperature Topr -20 ~ +75 ° C Storage temperature Tstg -30 ~ +80 ° C Soldering time (at 260 ℃) Tsol 5 S typical photovoltaic thermal parameters (Ta = 25 ° C) Item Symbol Conditions Min Typ Max Unit Forward Voltage VF IF = 60mA 3.0 3.2 3.4 V reverse voltage IR VR = 5V --- --- 5 uA luminous intensity Iv IF = 60mA 20 21 22 lm correlated color temperature Tc IF = 60mA 6000 6250 6500 K chromaticity coordinates x IF = 60mA --- 0.3164 --- --- y IF = 60mA --- 0.3357 --- --- ? 50% of the light angle 2θ IF = 60mA --- 120 --- deg CRI RA IF = 60mA 70 important tips: 1) All of the spectral parameters and their default position is determined by the standards of this Division 2) emission intensity. Test deviation ± 10%. 3) test correlated color temperature deviation of ± 10%. 4) Test emitting angle of deviation of ± 10 degrees. 5) Vf deviation of ± 0.05 V. 6) product packaging in the form of anti-static bag sealed Packing 7) LED reliability of detection is based on the relevant documentation standards of the Division 8) as required cleaning products, alcohol and the like necessary to use corrosive cleaning fluid and gently wipe applications: LCD backlight lamp lighting Source Automotive Application Notes: 1. The material is not more than twice the number of welding; do not weight LED lights 2. welding; do not distort the board 3. After soldering temperature does not return to normal temperature. Manual welding specifications: hand soldering iron temperature no higher than 300 ℃, each solder tail welding time is not more than 3 seconds. Storage Specification: 1. Do not open without preparing an antistatic bags before using LED; should be kept below 30 ℃ before 2. LED unopened, humidity 60% or less of the environment, the longest retention period of 1 year; 3. After opening the bag, LED should be kept at a temperature of 30 ℃ / 40% humidity under the following conditions, and must be used up within 7 days; 4. If the LED exceeds the requirements of point 3, the LED must go through in order to use baking, roasting conditions for 60 ± 5 ℃, 12 hours. Packaging: Our products are Reel, each roll 1000pcs.